Welcome to Xtreme Products Inc!
ATV Lift Kits for Rhinos, Ranger, Prowler, RZR, Teryx, Honda, Polaris, Suzuki, Yamaha, Arctic Cat & Kawasaki, ATV Wheel Spacers, ATV Bumpers, ATV Winches, Xtreme Products Honda Brake Conversion & other ATV Parts & Accessories.

SUZUKI

• Increase ground clearance.
  
• Achieve a firmer, more stable ride.
  
• Increase your ATVs payload capacity.
  
• Designed for maximum performance with enhanced handling and stability.
  
• Bolt on quick and easy installation.
  
• No welding, grinding, or additional parts required.
  
• All you need are common hand tools.
  
• All parts are laser cut for that perfect fit and are zinc plated for long life.
  
• Includes all hardware and easy to follow instructions.

This page features the King Quad but we have lifts for other Suzuki bikes like the Vinson and Eiger. On the early King Quad (thru '06) we get 3" of lift but on the late model ('07-up) we only get about 2.5". On the Eiger and Vinson we get 2" of lift on these bikes.

When we specify height measurments we are speaking the front height measured at the front lower control arm pivot bolt to the ground. Most bikes will not allow you to get as much lift in the rear as you do on the front as the rear comes from the factory already preloaded to set higher in the rear than the front. If you have questions contact us.

Here at Xtreme we know the last thing you need is a problem out on the trail. Our lifts are designed to eliminate that risk by never exceeding tolerances or angles that will cause you problems.